🚀 Learn BLE on Linux (BlueZ) – Programming Part 1
Hands-on Bluetooth Low Energy course. Special price: ₹399
Enroll Now on Udemy →C Loop Interview Questions
Test do while and for loops with a quiz, output prediction, coding challenges and model answers. A practice lab from our free C programming course for embedded systems.
Knowing syntax is not the same as passing an interview. This lab collects the C loop interview questions that matter for embedded roles and pairs them with a quiz, output puzzles and coding challenges. It is part of our free C programming course and free C tutorial for embedded C programming, so every answer is explained and every output was produced by a real GCC run.
Give yourself a quiet half hour, cover the answers and score honestly. The point is to find the gaps before an interviewer does.
What You Will Learn
Prerequisites
- The do while loop lecture
- The for loop lecture
- The for loop programs lecture
- GCC installed on Linux to verify your predictions
How to Use This C Loop Interview Questions Lab
Work through the sections in order. Cover the answer, commit to a response, then open it. Part A tests concepts, Part B asks you to predict real program output, Part C gives coding challenges and Part D collects the C loop interview questions that embedded interviewers ask most often. Output answers in Part B come from real GCC runs.
| Part | Content | Count | Target score |
|---|---|---|---|
| A | Multiple choice quiz | 10 | 8 or more |
| B | Output prediction | 8 | 6 or more |
| C | Coding challenges | 4 | Attempt all |
| D | Interview questions | 12 | Explain aloud |
Part A: Multiple Choice Quiz on Loops
Q1. Which loop always executes its body at least once?
a) while b) for c) do while d) none
Show answer
c) do while. The test comes after the body.
Q2. What follows the closing parenthesis of a do while loop?
a) nothing b) a colon c) an opening brace d) a semicolon
Show answer
d) a semicolon, because the whole construct is one statement.
Q3. In a for loop, which expression runs exactly once?
a) the condition b) the update c) the initialisation d) all three
Show answer
c) the initialisation runs once, when the loop starts.
Q4. When does the update expression of a for loop run?
a) before the body b) after the body c) only at exit d) before the condition on the first pass
Show answer
b) after the body, then the condition is tested again.
Q5. What does for(;;) do?
a) compile error b) runs once c) infinite loop d) never runs
Show answer
c) an empty condition counts as true, so it loops forever unless you break out.
Q6. A while loop whose condition is false at the start will run:
a) once b) zero times c) forever d) twice
Show answer
b) zero times, because the test is first.
Q7. Which statement jumps straight to the next test of the loop condition?
a) break b) continue c) goto d) return
Show answer
b) continue skips the rest of the pass and goes to the test (or the update in a for loop).
Q8. Which loop is best when the iteration count is known in advance?
a) for b) do while c) while d) goto
Show answer
a) for, because counter setup, test and update stay together.
Q9. What is the value of i after for (i = 0; i < 3; i++) finishes?
a) 2 b) 3 c) 4 d) undefined
Show answer
b) 3, the first value that failed the condition.
Q10. Which is a risk with an unsigned loop counter?
a) it cannot reach zero b) i >= 0 is always true c) it needs braces d) it runs backwards
Show answer
b) an unsigned value is never negative, so a test like i >= 0 never fails.
Part B: Predict the Output
For each program, write the exact output before you open the answer. Compile and run them yourself with gcc -std=c11 -Wall -Wextra to confirm.
Program 1
#include <stdio.h>
int main(void) { int x = 10; do { printf("%d ", x); x += 5; } while (x < 10); printf("\n"); return 0; }
Show answer
10 — The body runs once before the test fails, so the single value 10 prints. A while loop would print nothing.
Program 2
#include <stdio.h>
int main(void) { int i, s = 0; for (i = 1; i <= 4; i++) s += i * i; printf("%d %d\n", s, i); return 0; }
Show answer
30 5 — Squares 1, 4, 9 and 16 add to 30, and the loop leaves i at 5, the first value that failed the test.
Program 3
#include <stdio.h>
int main(void) { int i; for (i = 0; i < 10; i += 3) printf("%d ", i); printf("| %d\n", i); return 0; }
Show answer
0 3 6 9 | 12 — The counter moves in steps of 3 and stops at 12, which is the first value not below 10.
Program 4
#include <stdio.h>
int main(void) { int n = 0; do n++; while (n * n < 50); printf("%d\n", n); return 0; }
Show answer
8 — n becomes 8 because 7 times 7 is 49 and still below 50, while 8 times 8 is 64.
Program 5
#include <stdio.h>
int main(void) { int a, b; for (a = 1, b = 10; a < b; a += 2, b -= 2) printf("%d,%d ", a, b); printf("\n"); return 0; }
Show answer
1,10 3,8 5,6 — Two counters move toward each other and the loop stops once a passes b, right after the pair 5,6.
Program 6
#include <stdio.h>
int main(void) { int i, c = 0; for (i = 10; i > 0; i /= 2) c++; printf("%d %d\n", c, i); return 0; }
Show answer
4 0 — The loop halves i from 10 to 5, 2, 1 and 0 using integer division, so it runs 4 times and ends with i equal to 0.
Program 7
#include <stdio.h>
int main(void) { int i = 0; for (;;) { if (++i == 4) break; } printf("%d\n", i); return 0; }
Show answer
4 — break leaves the infinite loop when the pre-increment reaches 4.
Program 8
#include <stdio.h>
int main(void) { int i, k = 0; for (i = 0; i < 6; i++) { if (i % 2) continue; k += i; } printf("%d\n", k); return 0; }
Show answer
6 — continue skips odd values, so only 0, 2 and 4 are added, giving 6.
Part C: Coding Challenges
- Power table. Print the powers of 2 from 1 up to 256 using a for loop and a single variable that doubles each pass.
- Greatest digit. Read a positive integer and use a do while loop to find its largest digit.
- Debounce counter. Simulate a button that reads 0,0,1,1,1,1,1 and use a loop to report when five consecutive 1 readings have been seen.
- Retry with timeout. Poll a fake ready flag that becomes true on the fourth attempt, but stop with a TIMEOUT message after ten attempts.
How to self check
Run each solution with edge cases: zero, a single digit, the largest value your type can hold and an input that never succeeds. Compile with -Wall -Wextra and fix every warning.
Part D: C Loop Interview Questions and Answers
Q1. What is the difference between while and do while?
Show model answer
A while loop tests first and may run zero times. A do while loop tests last and runs at least once.
Q2. Write the equivalent while loop for a for loop.
Show model answer
Put the initialisation above the loop, keep the condition in while and place the update as the last statement of the body.
Q3. What does continue do in a for loop?
Show model answer
It skips the rest of the body and jumps to the update expression, which then runs before the condition is tested.
Q4. What is the value of the loop variable after a for loop ends normally?
Show model answer
It is the first value for which the condition was false, one step beyond the last pass for a simple counter.
Q5. How do you write an infinite loop in embedded C and why?
Show model answer
Use for (;;) or while (1) for the main super loop, since firmware must never return from main.
Q6. What is an off-by-one error?
Show model answer
A loop that runs one time too many or too few, usually from <= instead of < or a wrong starting index.
Q7. Why is a semicolon after for(…) dangerous?
Show model answer
It creates an empty loop body, so the loop spins doing nothing and the following statement runs once.
Q8. Why does for (unsigned u = 5; u >= 0; u–) never end?
Show model answer
An unsigned value cannot be negative, so the condition is always true and the counter wraps to a very large value.
Q9. How would you make a polling loop safe on hardware?
Show model answer
Read a volatile status register, count attempts or use a timer and return an error on timeout so the system never hangs.
Q10. Why must a flag shared with an interrupt be volatile?
Show model answer
Without volatile the compiler may keep the flag in a register and never see the interrupt change it, so the loop never exits.
Q11. When would you choose a do while loop in embedded code?
Show model answer
For retries and validation where the action or read must happen once before it can be judged.
Q12. How can you reduce loop overhead in a tight embedded loop?
Show model answer
Move invariant calculations out of the loop, avoid division and floating point in the body and let the compiler unroll constant-bound loops.
Common Mistakes Seen in Interviews
Best Practices for C Loop Interview Questions
Interview habits
- State the rule first, then give a one-line example.
- Mention the edge case such as zero passes or unsigned wrap.
- Relate the answer to embedded work: polling, buffers, interrupts.
- Offer to write the code on the board and trace it with a table.
Practising with C loop interview questions out loud, not just on paper, is what turns knowledge into fluent answers.
Key Takeaways
- While tests first and may run zero times, do while tests last and runs at least once.
- For runs initialisation once, tests before every pass and updates after every pass.
- Unsigned counters, stray semicolons and off-by-one bounds are the most tested bugs.
- Always predict output by tracing the counter pass by pass.
- Mention timeouts and volatile when discussing hardware loops.
Conclusion
A lab like this one turns the lectures into reflexes. Retry the sections you missed after a day and you will recognise the patterns in half the time.
With the loops complete, the next lectures introduce the remaining control statements in Chapter 5, including break and continue in more depth.
Frequently Asked Questions
What C loop interview questions are asked most often?
Interviewers ask about while versus do while, the order of for loop expressions, off-by-one errors, infinite loops in firmware and volatile polling flags.
How do I prepare for C loop interview questions?
Trace small programs by hand, run them to confirm and explain each answer aloud, covering edge cases such as zero passes.
Which loop is best in embedded C?
Use for when the count is known, while when it depends on events and do while when the first pass is required. Super loops use for(;;) or while(1).
How do I avoid infinite loops by mistake?
Make sure the update moves the counter toward the condition and bound every wait loop with a counter or timeout.
Why is volatile important in polling loops?
It forces the compiler to re-read the variable or register each time so changes made by hardware or an interrupt are seen.
Are the quiz answers verified?
The output prediction answers come from real GCC runs, and every code sample in this free C course was compiled.
Where do I go after this free embedded C course lab?
Continue to the next lectures in Chapter 5 of our free C programming course and free C tutorial.

2 Comments